EN Chapter 3 Printer operation 75
Service menu
To enter the service menu, see “Service mode” on page 74.
Figure 6. Service menu
Changing settings
The item-count value is changed using a different method than is used for other control panel values.
Instead of increasing the entire value by increments, each digit can be selected and modified
individually. The following control panel keys are used to modify the page count value:
S
ELECT
Enters any changes to the current digit and
advances the cursor one digit to the right. If the last
digit is currently selected, pressing the S
ELECT
key
wraps the cursor around to the first digit.
V
ALUE
- Increases the value of the currently selected digit by
one. Pressing V
ALUE
+ when 9 is the value of the
currently selected digit will change the value of the
digit to 0.
– V
ALUE
Decreases the value of the currently selected digit by
one. Pressing – V
ALUE
when 0 is the value of the
currently selected digit will change the value of the
digit to 9.
To Next Page
Loading...