HP 4145A - Page 48

Model 4145A
SECTION III
Table 3-3. Operational Error-Codes (Sheet 1 of 2)
Display
Error EOl
Error E02
Meaning
Arithmetic operator (-, +, /, *) or parenthesis is required.
EXECUTE was pressed with no executable text on the Keyboard Input
Line.
Error E03
Error E04
Error E05
Error E06
Error E0’7
Error E08
Error E09
Error 101
Error 102
Error 103
Error MO2
Error MO3
Error MO4
Error MO5
Error MO6
Error MO7
Error MO8
Error Ml9
Error ZOl
Error 202
Error 203
Object buffer overflow.
Improper d (delta) operation.
User function is used in the expression. (User function cannot be used in
an arithmetic expression.)
No variable or constant following an arithmetic operator.
Arithmetic expression contains an undefined variable.
Too many signs or parentheses.
Constant value is too large.
Stack Register overflow.
Improper calculation was attempted. For example, the divisor is zero.
Insufficient d data.
Disc is not inserted or is not correctly inserted.
The disc is write protected.
Illegal file name or file type.
The file name specified in the SAVE command has already been reserved
for the specified file type.
Number of total files exceeds 96.
Number of total records exceeds 131.
User area may be lost. Copy immediately onto another disc.
The disc was not initialized for the 4145A.
The program specified by the GET command in the auto-sequence
program contains an error. Press CONT to perform the next step of the
auto-sequence program.
The SINGLE command can be executed from the GRAPHICS, MATRIX,
LIST, or SCHMOO page only. Press CONT to perform the next step of
the auto-sequence program.
PLOT or PRINT was performed by the auto-sequence program but no
printer/plotter is connected to the 4145A or the printer/plotter is not set
to LISTEN. Press CONT to perform the next step of the auto- sequence
program.
3-15