HP 4284A - Page 250

Command
Reference
All commands in this reference are fully explained and listed in the
following functional command order.
HP 4284A Subsystem Commands
 DISPlay  OUTPut  TRIGger  MEMory
 FREQuency  BIAS  INITiate  CORRection
 VOLTage  FUNCtion  FETCh?  COMParator
 CURRent  LIST  ABORt  Mass MEMory
 AMPLitude  APERture  FORMat  SYSTem
 STATus
HP-IB Common Commands
 *CLS  *SRE  *OPC?  *TST?
 *ESE  *STB?  *WAI  *TRG
 *ESR?  *IDN?  *RST  *LRN?
 *OPT?
The explanation of each subsystem command is patterned as follows.
1. Subsystem command name
2. Command Tree (Subsystem command only)
3. Comp ound Command Name
4. Command Description
5. Command Syntax
6. Example Using The Above Command Syntax
7. Query Syntax
8. Query Response
9. Example Using The Above Query Syntax
Command Reference 8-9