HP 4284A - Page 252

DISPlay Subsystem
:PAGE
The :PAGE command sets the display page. The :PAGE? query
returns the abbreviated page name currently displayed on the LCD
screen.
Command Syntax
DISPlay:PAGE < page name >
Where, < page name > is:
MEASurement Sets display page to MEAS DISPLAY
BNUMber Sets display page to BIN No.DISPLAY
BCOunt Sets display page to BIN COUNT DISPLAY
LIST Sets display page to LIST SWEEP DISPLAY
MSETup Sets display page to MEAS SETUP
CSETup Sets display page to CORRECTION
LTABle Sets display page to LIMIT TABLE SETUP
LSETup Sets display page to LIST SWEEP SETUP
CATalog Sets display page to CATALOG
SYSTem Sets display page to SYSTEM CONFIG
SELF Sets display page to SELF TEST
Example
OUTPUT 717;"DISP:PAGE BCO" ! Set to the BIN COUNT DISPLAY
Query Syntax
DISPlay:PAGE?
Query Response
Returned data format is :
< page name > <NL^END>
Where,
< page name > Return the abbreviated name of the current display
page as shown in the preceding list.
Example
10 OUTPUT 717;"DISP:PAGE?"
20 ENTER 717;A$
30 PRINT A$
40 END
Command Reference 8-11