HP 4284A - Page 287

FETCh? Subsystem
:Source MONitor:VAC?
The :Source MONitor:VAC? query sets the latest measured voltage
monitor data into the HP 4284A's output buer.
Query Syntax
FETCh:SMONitor:VAC?
Query Response
Returned format is :
<NR3><NL^END>.
Example
10 OUTPUT 717;"TRIG:SOUR BUS"
20 OUTPUT 717;"TRIG"
30 OUTPUT 717;"FETC:SMON:VAC?"
40 ENTER 717;A
50 PRINT A
60 END
Note
If this query is received when the voltage level monitor is set to OFF,
returned data is 9.9E37 .
:Source MONitor:IAC?
The :Source MONitor:IAC? query sets the latest measured current
monitor data into the HP 4284A's output buer.
Query Syntax
FETCh:SMONitor:IAC?
Query Response
Returned format is :
<NR3><NL^END>.
Example
10 OUTPUT 717;"TRIG:SOUR BUS"
20 TRIGGER 717
30 OUTPUT 717;"FETC:SMON:IAC?"
40 ENTER 717;A
50 PRINT A
60 END
Note
If this query is received when the current level monitor is set to OFF,
returned data is 9.9E37 .
8-46 Command Reference