HP 4284A - Page 314

COMParator Subsystem
:SWAP
The :SWAP command sets the swap parameter function to ON (9
BIN settings for secondary parameter) or OFF (9 BIN settings
for primary parameter). The :SWAP? query resp onds the current
ON/OFF condition of the auxiliary BIN counting function.
Command Syntax
COMParator:SWAP
8
>
>
<
>
>
:
ON
OFF
1
0
9
>
>
=
>
>
;
Where,
0 (decimal 48) When the function is OFF
1 (decimal 49) When the function is ON
Example
OUTPUT 717;"COMP:SWAP ON"
Query Syntax
COMParator:SWAP?
Query Response
Returned Format is :
<NR1><NL^END>
Example
10 OUTPUT 717;"COMP:SWAP?"
20 ENTER 717;A
30 PRINT A
40 END
:BIN:CLEar
The :BIN:CLEar command clears all of the limit value settings.
Command Syntax
COMParator:BIN:CLEar
Example
OUTPUT 717;"COMP:BIN:CLE"
Command Reference 8-73