Mass MEMory
Subsystem
The
Mass MEMory
subsystem command group loads or stores setting
data from/to the internal EEPROM and the external memory card.
Figure 8-14 shows the command tree of the
Mass MEMory
subsystem
command group.
Figure 8-14. Mass MEMory Subsystem Command Tree
:LOAD:STATe
The
:LOAD:STATe
command loads the setting data from the in
ternal
EEPROM or a memory card.
Command Syntax
MMEMory:LOAD:STATe
<
value
>
Where,
<
value
>
0
to
9
(NR1) : record number for internal EEPROM
10
to
19
(NR1) : record number for memory card
Example
OUTPUT 717;"MMEM:LOAD:STAT 10"
:STORe:STATe
The
:STORe:STATe
command stores the setting data to the internal
EEPROM or to the memory card.
Command Syntax
MMEMory:STORe:STATe
<
value
>
Where,
<
value
>
0
to
9
(NR1) : record number for EEPROM
10
to
19
(NR1) : record number for memory card
Example
OUTPUT 717;"MMEM:STOR:STAT 5"
8-76 Command Reference
To Next Page
