HP 4284A - Page 427

Functions Initialize Method
Power ON *RST Device Clear
HP-IB
Data Buer
Memory
Cleared Cleared Not Aected
Data Format ASCII ASCI I Not Aected
Input Buer Cleared Not Aected Cleared
Output Buer Cleared Not Aected Cleared
Error Queue Cleared Not Aected Not Aected
Status Byte
1
Bit 7 0 Not Aected Not Aected
Bit 6 0 Not Aected Not Aected
Bit 5 0 Not Aected Not Aected
Bit 4 0 Not Aected 0
Enable Resister 0 Not Aected Not Aected
Operation Status
Register
1
Bit 4 0 0 Not Aected
Bit 3 0 0 Not Aected
Bit 0 0 0 Not Aected
Enable Resister 0 Not Aected Not Aected
Standard Event
Status Register
1
Bit 7 1 Not Aected Not Aected
Bit 6 0 Not Aected Not Aected
Bit 5 0 Not Aected Not Aected
Bit 4 0 Not Aected Not Aected
Bit 3 0 Not Aected Not Aected
Bit 2 0 Not Aected Not Aected
Bit 0 0 Not Aected Not Aected
Enable Resister 0 Not Aected Not Aected
Others
comment Cleared Cleared Not Aected
KEY LOCK OFF OFF Not Aected
1 Any other bits describ ed in this table are not used. (always 0)
C-4 Initial Settings and System Memory