HP 4284A - Page 7

HowTo Use This
Manual
This manual, the Op eration Manual for the HP 4284A Precision
LCR Meter, contains ten chapters plus appendixes, organized for the
convenience of the rst time user. After you receiveyour HP 4284A,
begin with Chapter 1.
Chapter 1
Getting Started
Chapter 1 provides unpacking, initial insp ection, and preparation
information necessary for you to know b efore you apply ACpower.
Chapter 2
Overview
Chapter 2 provides information including a pro duct overview and a
tour of the front panel, which will help you to quickly learn howto
operate the HP 4284A.
Chapter 3
DISPLAYFORMAT
Chapter 3 provides detailed information for the display format and
measurement function, corresponding to 4
DISPLAYFORMAT
5 menukey.
Chapter 4
MEAS SETUP
Chapter 4 provides detailed information for the measuremen
t
condition setup, corresp onding to 4
MEAS SETUP
5 menukey.
Chapter 5
CATALOG/SYSTEM
CONFIGURATION
Chapter 5 provides detailed information for the internal/external
memory and system conguration catalog of the HP 4284A,
corresp onding to 4
CATALOG/SYSTEM
5 menukey.
Chapter 6
Measurement Basics
Chapter 6 provides the basic measurement pro cedure with the
general imp edance theory and measurement techniques, and practical
measurement examples.
Chapter 7
Remote Control
Chapter 7 provides information to control the HP 4284A using the
HP-IB interface.
Chapter 8
Command Reference
Chapter 8 provides detailed information for each of the HP 4284A
HP-IB commands.
Chapter 9
General Information
Chapter 9 provides the sp ecications, rack mount/handle kit
installation, and other general information on the HP 4284A.
Chapter 10
Performance Test
Chapter 10 provides the p erformance tests for the HP 4284A used
for incoming inspection and verication that your instrumentis
completely calibrated.
vi