HP 4400 - Page 18

Table 5 Feature support in interopmodes 2 and 3 (continued)
Fabric OS 6.2.2eFabric OS Features (supported in interopmode 0)
IM 3IM 2IM = interopmode
No*No*Advanced Performance Monitoring (APM)
No*No*APM: Top Talkers
NoNoAdmin Domains
N/AN/ASecure Fabric OS
5
YesYesFabric Watch
YesYesPorts on Demand (POD)
YesYesNPIV
NoNoTimer Server Function (NTP)
N/AN/AOpen E_Port
6
NoNoBroadcast Zoning
NoNoFDMI
NoNoRemote Switch
YesYesPort Mirroring
Yes
7
YesExtended Fabrics
NoNoAlias Server
NoNoPlatform Service
YesYesFCIP (VE_Ports)
Yes
8
Yes
8
IPFC (IP over FC)
YesYesM-EOS ALPA 0x13 configuration
YesYesVE_Port to VEX_Port
YesYesIntegrated Routing
9
NoNoDomain Offset Support
Yes
12
N/A239 Domain Support (available on Mi10k only)
YesYesMasterless F_Port Trunking (AG connect to Fabric OS switches only)
YesYesFC10-6 to FC10-6 ISL
YesYesRASLog Events on duplicate WWNs
YesYesVirtual Fabrics
NoNoLogical Fabric using LISLs (XISLs in base Fabric)
*
Indicates that the feature is available, but not officially tested or supported.
1
Requires M-EOS 9.7 or later for redirection between devices attached to Fabric OS switches,
M-EOS 9.8 for redirection between devices attached to M-EOS switches, M-EOS 9.9 for use in
McDATA Open Fabric Mode. Supported EOS platforms include M4400, M4700, M6140, and
Mi10K.
2
Allowed only between Fabric OS-based switches.
3
DPS is supported outbound from Fabric OS-based switches. M-EOS can provide reciprocal load
balancing using Open Trunking.
18