●
System board (see
System board on page 84)
●
Fan/heat sink assembly (see
Fan/heat sink assembly on page 89)
To remove the processor:
1. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise (2) until you hear a click.
2. Lift the processor (3) straight up, and then remove it.
NOTE: The gold triangle (4) on the processor must be aligned with the triangle icon embossed
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
96 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
