HP 46 User Manual

You can see a few of the printer symbols from the problems above.
They were selected to be as logical and descriptive as possible to aid
you in later reference.
In the HP-46 the last number used in an operation is automatically
stored in an internal location labeled 0. You can recall and print that
last number by simply pressing@ . In the simple problems shown
above, the number is always 3. By pressing t}é‘ after any of the above
problems you get a printout that looks like this:
- U
300
The result of the operation is automatically saved just as if you'd
presssd ENTER?.
Rounding Numbers
After the calculator is switched on, numbers are printed with two places
shown to the right of the decimal point. But you can change this using
the FIX key. Press (] and follow it with a numerical key between O
and 9. If you press FIX 5, numbers will be printed rounded to show
five places after the decimal point. The possible formats for the number
1.23456789 are shown below:
Cm) 9 16234567890 <
Cm) 8 123456789 0
T J 12345679 °
] 6 1234568 °
(] b 1623457 °
() 4 123460 ¢
(] 3 1¢235 ¢
(] 2 1423 <
Cex )| 1.2 Q
C] 0 1. ©

HP 46 Specifications

General

Brand	HP
Model	46
Category	Calculator
Language	English