HP 4600

52 ENWW
11. Press ✔ to select ON or OFF.
12. Press the P
AUSE/RESUME button to return to the READY state.
To disable DLC/LLC
1. Press ✔ to enter the MENUS.
2. Press  to highlight CONFIGURE DEVICE.
3. Press ✔ to select CONFIGURE DEVICE.
4. Press  to highlight I/O.
5. Press ✔ to select I/O.
6. Press  to highlight EIO X (where X = 1, 2, or 3).
7. Press ✔ to select EIO X.
8. Press  to highlight DCL/LLC.
9. Press ✔ to select DCL/LLC.
10. Press  to highlight ON or OFF.
11. Press ✔ to select ON or OFF.
12. Press the P
AUSE/RESUME button to return to the READY state.