Table 5-9 Touchpad description and part number
Description Spare part number
Touchpad M51626-001
Touchpad cable M50423-001
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 30).
2. Remove the bottom cover (see Bottom cover and rubber feet on page 30).
3. Remove the battery (see Battery on page 32).
Remove the touchpad:
1. Remove the three Phillips M2.0.× 2.0 screws (1) that secure the touchpad bracket to the computer.
2. Remove the bracket from the computer (2).
3. Disconnect the cable from the ZIF connector on the touchpad module (1).
4. Remove the three Phillips M2.0 × 2.0 screws (2) that secure the touchpad to the computer.
Touchpad 41
To Next Page
Loading...
