Figure 3-18 Set Port Name dialog box
Type a port name in the Port Name: field and click Next to open the Installation Type dialog box
(see
Figure 3-20 Installation Type dialog box).
Click Next to proceed with the installation. The Installation Type dialog box opens (see
Figure 3-20
Installation Type dialog box).
NOTE If you selected Yes in the Confirm Changing Setting dialog box (see Figure 3-14
Confirm Changing Setting dialog box), the Change TCP/IP Settings dialog box opens, as shown
in the following figure.
70 Chapter 3 Install MS Windows printing-system components ENWW
MS Windows install
To Next Page
Loading...