HP 53131A/132A 225 MHz - Page 324

Index
Index-4 Programming Guide
power on status bit, 3-24, 3-26
power-on, 3-23, 3-26, 3-30
preset, 4-110
print, 4-43
prior firmware revisions
3317, 3335, and 3402, 2-32
3317, 3335,and 3402, 4-81
program messages
definition, 3-14
syntax, 3-14
program the Counter for math/limit
operations, 3-49
program the Counter for status reporting, 3-
38
program the Counter to define macros, 3-52
program the Counter to display results, 3-43
Program the Counter to Synchronize
Measurements, 3-46
programming examples, 3-58
programming for
display results, 3-43
macros, 3-52
math/limit operations, 3-49
status reporting, 3-38
synchronizing measurements, 3-46
Programming Guide Contents, 1-9
programs
examples, 3-59
writing SCPI (reference flowchart), 3-55
pulse width, 4-96
Q
QSB, 3-22
query, 3-12, 3-16
query error, 5-6
query parameters
<numeric value>, 3-12
MAXimum, 3-12
MINimum, 3-12
questionable data/signal status register
group, 3-27, 3-32, 4-110
queue
error, 5-2
key, 4-117
output, 4-133
QuickBASIC, using, 3-59
QYE, 3-24
R
radix, 3-17
ratio, 4-89
ratio, frequency, 4-65
reading an error, 5-2
REAL, 4-41
recall, 4-136
reference oscillator
calibration, 4-34
reference, oscillator, 4-92
Related Documentation, 1-10
remote, 3-6
reset, 4-137
response message syntax, 3-16
response messages, 3-16
data types, 3-17
results
display, 4-38
math, 4-7
query, 4-7, 4-14, 4-19
raw, 4-38
statistics, 4-19
revision
current firmware, 2-32, 4-81
firmware, 1-3, 2-31, 2-34, 4-130
prior firmware (3317, 3335, and 3402),
2-32
revisions
prior (3317,3335, and 3402), 4-81
rise time, 4-71, 4-89, 4-96
RQS/MSS, 3-22, 3-23
RS-232, 4-43
RS-232 connector, 4-114
RST, 4-137
affected setup, 2-40
unaffected setup, 2-40, 2-43
RST Response, 2-40
RST summary list, 2-40
S
S, 3-12
save, 4-138
scale, 4-7
scale/offset, 4-7
SCPI
command format, 3-7
conformance, 2-20
obtaining copy of standard, 1-10
query format, 3-7
version, 1-2, 2-20, 4-118
SCPI Command Summary Table, 2-25
SCPI programs, how to write, 3-55
SDCL, 4-31
security code, 4-28
security state, 4-28
selected device clear, 4-31
self-calibration, 4-26
self-test, internal, 4-142
sensitivity, 4-81
separate/common, 4-81