HP 53131A/132A 225 MHz - Page 36

Chapter 2 Command Summary
Front Panel to SCPI Command Maps
2-12 Programming Guide
Gate & ExtArm Key to SCPI Command Map (Cont.)
Totalize
Auto Arming:
a. [:SENSe]:TOTalize:ARM[:STARt]:SOURce IMMediate
[:SENSe]:TOTalize:ARM:STOP:SOURce IMMediate
Time Arming:
b
1
. [:SENSe]:TOTalize:ARM[:STARt]:SOURce IMMediate
b
2
. [:SENSe]:TOTalize:ARM:STOP:SOURce TIMer
c. [:SENSe]:TOTalize:ARM:STOP:TIMer <numeric_value> [S]
External Arming:
d. [:SENSe]:TOTalize:ARM[:STARt]:SOURce EXTernal
e. [:SENSe]:TOTalize:ARM[:STARt]:SLOPe POSitive | NEGative
f
1
. [:SENSe]:TOTalize:ARM:STOP:SOURce TIMer
f
2
. [:SENSe]:TOTalize:ARM:STOP:SOURce EXTernal
[:SENSe]:TOTalize:ARM:STOP:SLOPe POSitive | NEGative
g. [:SENSe]:TOTalize:ARM:STOP:TIMer <numeric_valu e> [S]
Rise Time, Fall Time, +/- Pulse Width, Dutycycle
Auto Arming:
a. [:SENSe]:TINTerval:ARM[:STARt]:SOURce IMMediate
External Arming:
b. [:SENSe]:TINTerval:ARM[:STARt]:SOURce EXTernal
c. [:SENSe]:TINTerval:ARM[:STARt]:SLOPe POSitive | NEGative
Figure 2-4. Gate & ExtArm Key to SCPI Command Map (Part 3 of 6)