HP 53131A/132A 225 MHz - Page 66

Chapter 2 Command Summary
*RST Response
2-42 Programming Guide
Table 2-3A. HP 53131A (and HP 53132A With S/N Prefix Below
3646)Time Interval *RST State
Command Header Parameter State
[:SENSe]:TINTerval:ARM[:STARt]:SLOPe
[:SENSe]:TINTerval:ARM[:STARt]:SOURce
[:SENSe]:TINTerval:ARM:STOP:SOURce
[:SENSe]:TINTerval:ARM:STOP:TIMer
POSitive | NEGative
IMMediate | EXTernal
IMMediate | TIMer
<numeric_value> [S]
POSitive
IMMediate
IMMediate
10E−3 S
Table 2-3B. HP 53132A (S/N 3646 and above) Time Interval *RST
State
Command Header Parameter State
[:SENSe]:TINTerval:ARM:ESTART:LAYer2:SLOPe
[:SENSe]:TINTerval:ARM:ESTART:LAYer2:SOURce
[:SENSe]:TINTerval:ARM:ESTART[:LAYer[1]]:ECOunt
[:SENSe]:TINTerval:ARM:ESTART[:LAYer[1]]:SOURc
e
[:SENSe]:TINTerval:ARM:ESTART[:LAYer[1]]:TIMer
[:SENSe]:TINTerval:ARM:ESTOP:LAYer2:SLOPe
[:SENSe]:TINTerval:ARM:ESTOP:LAYer 2:SOURce
[:SENSe]:TINTerval:ARM:ESTOP[:LAYer[1]]:ECOunt
[:SENSe]:TINTerval:ARM:ESTOP[:LAYer[1]]:SOURce
[:SENSe]:TINTerval:ARM:ESTOP[:LAYer[1]]:TIMer
[:SENSe]:TINTerval:ARM[:STARt]:SLOPe
[:SENSe]:TINTerval:ARM[:STARt]:SOURce
[:SENSe]:TINTerval:ARM:STOP:SOURce
[:SENSe]:TINTerval:ARM:STOP:TIMer
POSitive | NEGative
IMMediate | EXTernal
<numeric_value>
IMMediate | TIMer | INTernal1
<numeric_value>
POSitive | NEGative
IMMediate | TIMer
<numeric_value>
IMMediate | TIMer | INTernal2
<numeric_value>
POSitive | NEGative
IMMediate | EXTernal
IMMediate | TIMer
<numeric_value>
POSitive
IMMediate
1
IMMediate
0.1µs
POSitive
IMMediate
1
IMMediate
0.1µs
POSitive
IMMediate
IMMediate
0.1µs