HP 5500 HI Series Command Reference

163
Examples
# Specify the IP address as 1.1.0.1, the subnet mask as 255.255.255.0 for VLAN interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] ip address 1.1.0.1 255.255.255.0
mtu
Syntax
mtu size
undo mtu
View
VLAN interface view
Default level
2: System level
Parameters
size: Sets the maximum transmission unit (MTU), in the range of 46 to 1500 bytes.
Description
Use mtu to set the MTU for a VLAN interface.
Use undo mtu to restore the default.
By default, the MTU of a VLAN interface is 1500 bytes.
Related commands: display interface vlan-interface.
Examples
# Set the MTU to 1492 bytes for VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] mtu 1492
name
Syntax
name text
undo name
View
VLAN view
Default level
2: System level
Parameters
text: Specifies a VLAN name, a string of 1 to 32 characters. The string can include case-sensitive letters,
digits, special characters such as tilde (~), exclamation point (!), at sign (@), pound sign (#), dollar sign
($), percent sign (%), caret (^), ampersand sign (&), asterisk (*), left brace({), right brace (}), left

HP 5500 HI Series Specifications

General

Brand	HP
Model	5500 HI Series
Category	Switch
Language	English