EasyManuals Logo

HP 5500 HI Series Command Reference

HP 5500 HI Series
292 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
13
Eth1/0/9 DOWN auto A A 1
Eth1/0/10 DOWN auto A A 1
# Filter the brief interface information to display the line starting with the (s) string and all subsequent
lines.
<Sysname>display interface brief | begin (s)
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
NULL0 UP UP(s) --
Vlan1 UP UP 192.168.0.80
When you use the begin keyword to filter the output, the system only searches the Layer 3 interface list or
the Layer 2 interface list. If regular-expression is on the Layer 3 interface list, the system only displays the
line that contains regular-expression, and all subsequent lines on the Layer 3 interface list.
# Display the interfaces in down state and the reasons why they are down.
<Sysname> display interface brief down
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
Eth1/0/1 DOWN Not connected
Eth1/0/2 DOWN Not connected
Eth1/0/3 DOWN Not connected
Eth1/0/4 DOWN Not connected
Eth1/0/5 DOWN Not connected
Eth1/0/6 DOWN Not connected
Eth1/0/7 DOWN Not connected
Eth1/0/8 DOWN Not connected
Eth1/0/9 DOWN Not connected
Eth1/0/10 DOWN Not connected
Table 6 Command output
Field Description
The brief information of
interface(s) under route
mode:
The command displays brief information about Layer 3 interfaces.
Link: ADM -
administratively down;
Stby - standby
Link layer state of the interface:
• ADM—The interface has been shut down by the network administrator. To
recover its physical layer state, perform the undo shutdown command.
• Stby—The interface is a standby interface.
Protocol: (s) - spoofing
If the network layer protocol state of an interface is shown as UP, but its link is an
on-demand link or not present at all, its protocol attribute includes the spoofing
flag (an s in parentheses). This attribute is typical of interface Null 0 and the
loopback interfaces.
Interface Interface name.

Table of Contents

Other manuals for HP 5500 HI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 5500 HI Series and is the answer not in the manual?

HP 5500 HI Series Specifications

General IconGeneral
BrandHP
Model5500 HI Series
CategorySwitch
LanguageEnglish

Related product manuals