3. Click Code load.
The Code Load Selection window opens.
Figure 12 Code Load Selection window – storage system
.
4. Select Code Load Storage System and click Select.
5. The Code Load Storage System – Page 1 window opens.
Figure 13 Code Load Storage System-Page 1 window
.
6. Click Browse, navigate to the installation CD (that was created from the download .ISO image.)
and select the appropriate file as shown in the following table.
Table 7 Controller software
SelectFor this array
\HSV300\09522000\300_09522000.SSSEVA4400
\HSV400\09522000\400_09522000.SSSEVA6400
\HSV450\09522000\450_09522000.SSSEVA8400
Upgrading the Enterprise Virtual Array56
To Next Page
Loading...
