• 8 to 16 characters in length
• Can include upper or lower case letters
• Can include numbers 0 - 9
• Can include the following characters: ! “ # $ % & ‘ ( ) * + , - . / : ; < = > ? @ [ ] ^ _ ` { | }
• Cannot include the following characters: space ~ \
Enabling password access in HP Command View EVA
Estimated time to complete: 10 minutes
You must enable password access in HP Command View EVA. To enable password access to a
storage system, perform the following steps:
1. Start HP Command View EVA in your browser.
2. Click Agent Options in the Session pane.
The Management Agent Options window opens.
3. Click Storage system password access.
The Storage System Password Access window opens.
4. Click Enable.
The Enable Password Access to a Storage System window opens.
Figure 26 Enable Password Access to a Storage System window
.
5. Select the World Wide Node Name of the storage system for which you want to enable password
access.
6. Enter the password in the Password and Confirm password fields.
7. Click Enable Password.
A message box opens.
8. Click OK.
HP Command View EVA enables password access to the storage system.
Step 8. Resuming storage system operation
Estimated time to complete: Varies.
HP StorageWorks Enterprise Virtual Array updating product software guide (XCS 09522000) 67
To Next Page
Loading...
