3. Unplug DP2-A on controller A from P1 (I/O-A) on disk enclosure 4 (S-4) and:
a. Connect DP2-A on controller A to P1 (I/O-A) on disk enclosure 10 (S-10).
b. Connect P1 (I/O-A) on disk enclosure 4 (S-4) to P2 on disk enclosure 12 (S-12).
c. Repeat Step 2.
4. Unplug DP1-B on controller B from P1 (I/O-B) on disk enclosure 1 (S-1) and:
a. Connect DP1-B on controller B to P1 (I/O-B) on disk enclosure 7 (S-7).
b. Connect P1 (I/O-B) on disk enclosure 1 (S-1) to P2 (I/O-B) on disk enclosure 9 (S-9).
c. Repeat Step 2.
5. Unplug DP2-B on controller B from P1 (I/O-B) on disk enclosure 4 (S-4) and:
a. Connect DP2-B on controller B to P1 (I/O-B) on disk enclosure 10 (S-10).
b. Connect P1 (I/O-B) on disk enclosure 4 (S-4) to P2 (I/O-B) on disk enclosure 12 (S-12).
c. Repeat Step 2.
Figure 23 shows the completed cabling for an EVA6400 2C6D to 0C6D expansion.
Figure 23 Complete cabling for an EVA6400 2C6D to 0C6D expansion
.
HP StorageWorks 6400/8400 Enterprise Virtual Array expansion rack reference guide 31
To Next Page
Loading...
