HP 6400/8400 - Complete Cabling for an EVA8400 2 C6 D to 0 C6 D Expansion; General EVA8400 Expansion Cabling Guidelines

Figure 25 Complete cabling for an EVA8400 2C6D to 0C6D expansion
.
General EVA8400 expansion cabling guidelines
To adapt the cabling used in Figure 25 to different configurations, follow these cabling guidelines:
• Controller A
• DP1-A on controller A connects to P1 (I/O-A) on the top disk enclosure in the first loop (expan-
sion rack).
• DP2-A on controller A connects to P1 (I/O-A) on the top disk enclosure in the second loop
(expansion rack).
• DP3-A on controller A connects to P1 (I/O-A) on the top disk enclosure in the third loop (expan-
sion rack).
• DP1-B on controller A connects to P2 (I/O-B) on the bottom disk enclosure in the first loop (main
rack).
• DP2-B on controller A connects to P2 (I/O-B) on the bottom disk enclosure in the second loop
(main rack).
• DP3-B on controller A connects to P2 (I/O-B) on the bottom disk enclosure in the third loop
(main rack).
• Controller B
HP StorageWorks 6400/8400 Enterprise Virtual Array expansion rack reference guide 35