Table 1. (Continued) Key features for F10 Setup on select 2008 HP business notebook PCs
Feature Function
Options (Default in Bold where
applicable)
SECURITY MENU
TPM Embedded Security
Embedded Security Device
Availability
Exposes the integrated TPM module. Available/Hidden
Embedded Security Device
State
Enables the integrated TPM module.
Enabled/Disabled
Factory Defaults Set TPM Embedded Security settings
to factory default
Yes/No
Power-On Authentication
Support
Enables multi-factor authentication at
power on.
Enabled/Disabled
Reset Authentication
Credential
Resets credentials.
Yes/No
OS Management of TPM Allow the operating system to
manage TPM module.
Enabled/Disabled
Reset of TPM from OS Allows reset of TPM module from
within the operating system.
Enabled/Disabled
Utilities
HP Disk Sanitizer Performs erasure of all data on
selected hard drive
Notebook Hard Drive
Cancel
System IDs:
Notebook Asset Tag Allows for custom configuration of
an asset tag.
Serial Number
Notebook Ownership Tag 1 Allows for custom configuration of
an ownership tag.
Blank
Notebook Ownership Tag 2 Allows for custom configuration of
an ownership tag.
Blank
DIAGNOSTICS
System Information Provides system information, such as
serial number, model number, CPU
type, and memory configuration.
F1
Escape to Cancel
Start-Up Test Performs diagnostics check on
memory and hard disk.
F2
Escape to Cancel
Run-In Test Performs a continuous diagnostics
check on memory and hard disk.
F3
Escape to Cancel
Hard Disk Test Performs hard drive diagnostics
check.
F4
Escape to Cancel
To Next Page
Loading...
Need help?
General
