42 HP Jornada 700 Series Handheld PC
4. Tap OK twice to save your settings and exit.
To check the connection settings in ActiveSync
on your desktop Computer
1. Depending upon your connection method, verify that the sync
cable from your docking cradle (optional on the HP Jornada
710) or HP Jornada is connected to the listed serial port in
the Connection Settings dialog box, or that Allow USB
Connection with this desktop computer is selected.
2. If you are connecting via infrared, be sure that Allow serial
or infrared connection to this COM port is selected
and that the correct IrDA COM port is displayed.
3. If you continue to have difficulty synchronizing, in the
Connection Settings dialog of the Microsoft ActiveSync
window, clear the Allow check box for the type of connection
you are using, and then click OK.
4. After the connection is disabled, re-select the appropriate
Allow check box and click OK to enable the connection again.
To Next Page
Loading...
