Chapter 2 Printing Tasks 136
Printing Special Paper
CAUTION Failure to follow these instructions can damage the printer.
Do not:
! Load Tray 1 to capacity because labels are heavier than paper.
! Use labels that are separating from the backing sheet, wrinkled, or
damaged in any way.
! Use labels that have the backing sheet exposed. (Labels must cover the
entire backing sheet with no exposed spaces.)
! Feed a sheet of labels through the printer more than once. The adhesive
backing is designed for only one pass through the printer.
! Print on both sides of labels.
! Send labels to any output destination except the Face-up Bin.
To Next Page
Loading...