Chapter 2 Printing Tasks 142
Printing Special Paper
Setting Custom Paper Sizes
When custom paper is loaded, size settings need to be selected from the
software application (the preferred method), the printer driver, or from the
printer’s control panel. The size settings defined for custom-size paper applies
to all custom paper trays installed on the printer.
Note Only one custom paper size is recognized by the printer at one time.
Settings in the printer driver and software application override control
panel settings. (Software application settings override printer driver
settings.)
Continued on next page.
X (front edge)
7.5 in. (191 mm)
Y (side edge)
3.9 in. (98 mm)
To Next Page
Loading...