Chapter 3 Advanced Printing Tasks 161
Changing the Variable Fuser Mode
The user can change the variable fuser mode for each of these types of paper
from the control panel. The following are the variable fuser modes:
Most paper types are set to NORMAL by default. The exceptions are:
! TRNSPRNCY=LOW
! LABELS=HIGH1
! CARDSTOCK=HIGH2
! ROUGH=HIGH1
Continued on next page.
Variable Fuser Mode Temperature and Printing Speed for Letter and A4
NORMAL Normal fuser temperature setting, 32 ppm
LOW Low fuser temperature setting, 32 ppm
HIGH1 Raises fuser temperature setting, 32 ppm
HIGH2 Raises fuser temperature setting, 24 ppm
HIGH3 Raises fuser temperature setting, 16 ppm
To Next Page
Loading...