Chapter 5 Problem Solving 233
Understanding Printer Messages
EXTERNAL DEVICE
INITIALIZING
When an external paper handling device is connected to the
printer, it must have 10 seconds to initialize after power on or after
coming out of PowerSave mode.
FINISHER LOW ON
FINISHING AGENT
The finishing device is running out of its finishing material and
needs to be refilled.
FLASH n
INITIALIZING
alternates with
DO NOT POWER OFF
The flash DIMM can take a long time to initialize the first time that
it is used.
FLASH DEVICE
FAILURE
The flash DIMM had a critical failure and no longer can be used.
Remove the flash DIMM and replace it with a new one.
FLASH FILE
OPERATION FAILED
The requested operation could not be performed. You might have
attempted an illegal operation, such as trying to download a file to
a non-existent directory.
FLASH FILE
SYSTEM IS FULL
Delete files from the flash DIMM. Use HP LaserJet Resource
Manager to download or delete files and fonts. (See the software
help for more information.)
Printer Messages (continued)
Message Explanation or Recommended Action
To Next Page
Loading...