Chapter 5 Problem Solving 282
Correcting Output Quality Problems
Paper jams and paper
feeding problems.
! See page 209
for instructions.
! Make sure that paper specifications are within the
recommended range (page 390
).
! Verify that the paper type configured in the printer control
panel for Tray 4 matches the paper loaded in Tray 4
(page 98
).
! A tray might have been pulled out during printing.
! Check cables and connectors between the tray and the
printer. See page 292
for cabling configurations.
! Remove and reconnect the power cord if it is not firmly
plugged into the computer.
! Make sure trays are correctly loaded.
! Make sure the paper guides are adjusted properly and not
skewed (page 98
).
! Perform preventive maintenance if requested by the
printer.
Problems with the Optional 2000-sheet Input Tray (Tray 4) (continued)
Situation Solution
To Next Page
Loading...