Chapter 5 Problem Solving 308
Correcting Output Quality Problems
Selecting an alternate PPD
1 Open the Chooser from the Apple menu.
2 Click the LaserWriter 8 icon.
3 If you are on a network with multiple zones, select the zone in the AppleTalk
Zones box where the printer is located.
4 Click the printer name you want to use in the Select a PostScript Printer box.
(Double-clicking will immediately generate the next few steps.)
5 Click Setup... (This button might read Create for first-time setup.)
6 Click Select PPD....
7 Find the desired PPD in the list and click Select. If the desired PPD is not
listed, choose one of the following options:
" Select a PPD for a printer with similar features.
" Select a PPD from another folder.
" Select the generic PPD by clicking Use Generic. The generic PPD allows
you to print, but limits your access to printer features.
Continued on next page.
To Next Page
Loading...