Chapter 5 Problem Solving 319
Checking the Printer’s Configuration
Note For step-by-step instructions on using printer commands to select a font
with DOS applications, see page 486.
! Font # is the number used to select fonts from the printer’s control panel
(not the software application). Do not confuse the font # with the font ID,
described below. The number indicates the DIMM slot where the font is
stored.
" SOFT: Downloaded fonts that stay resident in the printer until other fonts
are downloaded to replace them or until the printer is turned off.
" INTERNAL: Fonts that permanently reside in the printer.
! Font ID is the number you assign to soft fonts when you download them
through software.
To Next Page
Loading...