Appendix A Specifications 408
Paper Specifications
Envelopes with Adhesive Strips or Flaps
Envelopes with a peel-off adhesive strip or with more than one flap that folds
over to seal must use adhesives compatible with the heat and pressure in the
printer. The extra flaps and strips might cause wrinkling, creasing, or jams.
Envelope Margins
The following table gives typical address margins for a Commercial #10 or DL
envelope.
Note For the best print quality, position margins no closer than 0.6 inch
(15 millimeters) from the edges of the envelope.
Type of Address Top Margin Left Margin
Return Address 0.5 in. (15 mm) 0.6 in. (15 mm)
Delivery Address 2 in. (51 mm) 4 in. (85 mm)
To Next Page
Loading...