HP 8150 - Page 428

Appendix B Control Panel Menus 428
Paper Handling Menu
ENV FEEDER
TYPE=PLAIN
For supported
paper types, see
page 397
.
This item appears only when the optional
envelope feeder is installed. Set the value to
correspond with the envelope type currently
loaded in the envelope feeder.
TRAY 1
MODE=FIRST
FIRST
CASSETTE
Determine how the printer will use Tray 1.
FIRST: If paper is loaded in Tray 1, the printer will
pull paper from that tray first.
CASSETTE: A paper size must be assigned to
Tray 1 using the TRAY 1 SIZE option (the next item
in this menu when TRAY 1 MODE= CASSETTE). This
allows Tray 1 to be used as a reserved tray.
For more information, see page 154
.
TRAY 1
SIZE=LETTER
For supported
paper sizes, see
page 390
.
This item appears only when TRAY 1 MODE=
CASSETTE. Set the value to correspond with the
paper size currently loaded in Tray 1.
TRAY 1
TYPE=PLAIN
For supported
paper types, see
page 397
.
This item appears only when TRAY 1 MODE=
CASSETTE. Set the value to correspond with the
paper type currently loaded in Tray 1.
Item Values Explanation