HP 8150 - Page 432

Appendix B Control Panel Menus 432
Paper Handling Menu
CONFIGURE EDGE
TO EDGE=NO
NO
YES
Configure the margin alignment for the tray you
wish to print an edge-to-edge print job from.
NO: The edge-to-edge configuration menu items
are not accessible.
YES: Additional edge-to-edge configuration menu
items appear.
PRINT TEST PAGE
TRAY=ALL
ALL
1
2
3
4
This item appears only when an external input
paper handling device is installed.
An edge-to-edge calibration page will print for
the tray selected.
TRAY X
SHIFT=NONE
NONE
LEFT 1
LEFT 2
LEFT 3
RIGHT 1
RIGHT 2
RIGHT 3
Allows you to set a value that will shift the
placement of an image to the left or right on the
page.
Item Values Explanation