Appendix B Control Panel Menus 450
Configuration Menu
AUTO
CONTINUE=ON
ON
OFF
This item determines how the printer reacts to
errors.
ON: If an error occurs that prevents printing, the
message will display, and the printer will go offline
for 10 seconds before returning online.
OFF: If an error occurs that prevents printing, the
message will remain on the display and the printer
will remain offline until G
O
is pressed.
Note
To stop printing when out of staples (when a stapler
accessory is installed), set AUTO CONTINUE=OFF in
the control panel Configuration Menu.
Item Values Explanation
To Next Page
Loading...