Appendix B Control Panel Menus 462
EIO Menu
CFG TCP/IP=NO NO
YES
NO: The TCP/IP Menu is not accessible.
YES: The TCP/IP Menu appears. In the TCP/IP Menu, you
can specify BOOTP=YES for TCP/IP parameters to be
automatically loaded from a bootp or DHCP server when
the printer is turned on. If you specify BOOTP=NO, you can
manually set selected TCP/IP parameters from the
control panel. You can manually set each byte of the IP
address (IP), Subnet Mask (SM), Syslog Server (LG), and
Default Gateway (GW). For example:
If the Syslog Server IP address is left blank, the printer
will still work. Also, you can manually set the Timeout
time period.
Item Values Explanation
192.0.0.192
Byte 1
Byte 2
Byte 3
Byte 4
To Next Page
Loading...