Appendix C Printer Memory and Expansion 478
Adjusting Memory Settings
I/O Buffering
To allow the computer to continue working without waiting for the print job to
finish queuing, the printer uses a portion of its memory (an I/O buffer) to hold
jobs in progress. (If I/O buffering is off, no memory is reserved for this
function.)
In most cases, it is best to let the printer automatically reserve memory for I/O
buffering.
To speed network printing, you might want to increase the amount of memory
reserved for I/O buffering.
To change the I/O Buffer setting:
1 From the I/O Menu, set I/O BUFFER=ON (page 457
).
2 Also from the I/O Menu, set I/O SIZE to the desired value.
Note When you change the I/O Buffer setting, all downloaded resources (such
as fonts or macros) will need to be downloaded again, unless they are
stored on an optional hard disk or flash DIMM.
To Next Page
Loading...