Chapter 2 Printing Tasks 92
Loading the Input Tray
6 Slide the paper into the printer until paper fits
squarely and firmly between the paper width
guides, without bending.
Note
Paper heavier than 28 lb (105 g/m²) should be
printed from Tray 1 to the Face-up Bin to avoid
curl. If you are having trouble printing on media
other than plain paper, see Changing the
Variable Fuser Mode on page 160.
If Tray 1 is in CASSETTE mode, the printer Attention
light will flash. Press - V
ALUE
+ to change the
size to match the paper size in Tray 1 and press
S
ELECT
.
6
To Next Page
Loading...