Model 8642A/B Operation
Amplitude Sweep (cont'd)
Example for Calculation #4 (cont'd)
Display
1 KJ fcj.fcJ £J HJ tU HJ IU Ml L.
PREQ SWPNG
i m ni TJ m
1 KJ.tU XI Ml
START
i n n TI m
1 kJ.KLI XI Ml
AMPTD STOP
The display usually shows the start amplitude and the stop amplitude settings. If
another active function is selected, the display could indicate amplitude sweep with
the SWPNG annunciator or by displaying SWEEP in the right portion of the display
above the AMPTD annunciator. To actually see the 0.8 dB steps on the display, you
can select manual sweep and turn the Knob slowly or use the Step keys.
3-91
To Next Page
