HP 8753E - Page 681

area of display, l-10
arrays, 6-7
menu, 6-32
giizj ;zkzz
polar, 2-24
Smith, 2-25
@ZZJ menu map, 8-7
formatting
a disk, 4-43
~~~~~:~ 4-29
::: .i>.........i . . .../....
’
,,,...,.....
forward transform, 6-143
demodulating the results, 6-143
range, 6-145
four-parameter display, 6-8
four-parameter dispiay functions, 2-10, 645
frequency
drift, 5-3
response and isolation error-corrections,
5-14
selection for mixers, 3-2
specifications, 7-10
frequency domain
concepts, 6-125-145
transform from CW time, 6-142
frequency offset
specifications, 7-12
frequency offset mode, 3-7
mixer testing, 6-157
operation, 34
frequency offset operation, 6-120
applications, 6-120
compatible instrument modes, 6- 12 1
description, 6-121
display annotations, 6-122
error message, 6-122
frequency hierarchy, 6-121
frequency ranges, 6- 12 1
Lo frequency, 6-121
offset frequency, 6-121
receiver and source requirements, 6-122
receiver frequency, 6-121
spurious signals, 6-122
test setup, 6-120
frequency range
dellning, 6-12
frequency response, 6-60
error-corrections, 5-9
frequency response of calibration standards,
6-73
frequency span
decrease, 5-51
frequency-to-time domain, 6-125
fringe capacitance, 6-74
front panel access key for softkeys, 9-75
front panel connectors, 7-17
front panel features, l-4
front-panel key delinitions, 9-2
full-acceptor handshake (AHl), 11-19
full-source handshake (SHl), 11-19
fuli two-port
calibration, 6-80
error-correction, 5-21
G
gain and reverse isolation measurement,
2-59
gain compression measurement, 2-55
gate
flags, 2-85
parameter setting, 2-85
shaping, 2-85
gate span setting, 2-85
gating, 6-6
procedure, 2-85
time domain, 6-141
gating effects in frequency domain, 2-87
Gat status notation, l-8
G+jB MKR, 2-26
GPIO interface, l-11
GPIO mode, 6-113, 6-147
group delay, 6-38
format, 6-33
measurement, 2-43
measurement connections, 3-25
measurement example, 3-26
mixer measurements, 3-24
specifications, 7-15
group delay accuracy vs aperture, 7-15
group delay or phase mixer measurements,
3-24
group execute trigger response (DTl), 11-19
guidelines for code naming, 11-22
H
H = 2 status notation, l-9
H = 3 status notation, l-9
handshake lines, 11-17
hardkey definitions, 9-2
harmonic mode option, 1-13
harmonic operation, 6-123
accuracy, 6-124
coupling channel power, 6-124
dual-channel, 6-123
frequency range, 6-124
input power, 6-124
single-channel, 6-123
test setup, 6-123
harmonics
specifications, 7-10
Index-8