HP 9000 300 Series - Page 35

5 This SCSI configuration menu
will appear.
6 Press the key for the interface
function you want
to change.
For example,
to change the
select code, press:
CD
and the SCSI menu changes to
the screen at the right. Note
the command line has changed
and used select codes are listed.
SCSI
Key Feature Value
1 Select Code 14
2 Interrupt Level
3 Parity
4 Bus Address
X to eXit menu
Type [key] RETURR ?
3
Y
7
SCSI
Key Feature
Value
1 Select Code 14
2 Interrupt Level 3
3
Parity Y
4 Bus Address 7
X to eXit menu
1
Select Code 14
used select codes are :
12 14 15 21
Type 0 .. 31 except used RETURI?
Configuring Internal Interfaces and Boot Modes 3-5
3