HP 9000 rp3410 - How to Capture Service Guard Related Information; How to Automatically Run Crashinfo; How Can I Modify the Temporary Directory; Can I Modify the Script

getsysinfo.sh -sd2 -sd2opt “-d MM/DD/YY” # get only data from after that date
getsysinfo.sh -sd2 -sd2opt “hostname user password”
Note: by default, sd2collect only captures data from the last 30 days unless getsysinfo.sh option -h or -a was
given.
How to capture Service Guard related information ?
By giving either the -sw or -sginfo option the script sginfo is run.
(see https://h20628.www2.hp.com/km-ext/content-webapp/document?docId=emr_na-c03661098 )
It -sginfo was given, the output filename defaults to sysinfo+sginfo_host_date.tgz.
Without that option, getsysinfo.sh still collects by default the cmclview -v information into the file
service_guard.txt
How to automatically run crashinfo ?
ksh getsysinfo.sh -c #runs /opt/sfm/tools/crashinfo on the latest dump if present
Since version 9.18 getsysinfo.sh can call the crashinfo tool which comes with System Fault
Manager and usually is located in /opt/sfm/tools.
You can also specify another crashinfo location with the CRASHINFO environment variable, for
example :
CRASHINFO=/tmp/crashinfo ksh getsysinfo.sh -c
By default, only the last dump is analyzed. To analyze all dumps you can use:
ksh getsysinfo.sh -c all
Attention: Analyzing dumps may be a time and storage (/var/adm/crash) consuming task depending
on the size of the dump.
How can I modify the temporary directory ?
Simply set the environment variable TMPDIR which is used by mktemp to specify the location of
temporary files and directories.
For example:
TMPDIR=/var/tmp ksh getsysinfo.sh
Can I modify the script ?
It is safe to modify the parameters at the beginning of the script:
#!/usr/bin/ksh
# @(#)Revision: 9.19$ $by S. Stechemesser, HP$ $Date: 09/24/2013$
#
#the below construct is needed no line in getsysinfo.sh is longer than 80 chars
#for cut&paste
READMELINK="https://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public"
READMELINK="$READMELINK/kb/docDisplay/?docId=emr_na-c03800758"
export LANG=C
export UNIX95=1
GETSYSINFOVERSION="9.19"
#CKSUM: 821721222
OLDOPTIONS=$*
TDIR=` mktemp ` # temporary directory (will be created and deleted if empty)
#use the TMPDIR environment variable if needed - see man mktemp
NAMEBASE=/tmp/sysinfo #default output name prefix
#add hostname + timestamp by default
NAME=${NAMEBASE}_`hostname`_`date +%Y%m%d%H%M`
MPJAVA=0 #do not run jar file by default, only with -mp option
GETOA=0 #get OA info via telnet
SD2=0 #do not run be default
SGINFO=0 #do not run sginfo by default