HP 9000 rp3410 - Accessing the Graphic Console Using VGA; Figure 3-51 Status Summary Page

Installing the System
Accessing the Host Console
Chapter 3
117
Step 3. Click Sign In. The Status Summary page displays after login.
Figure 3-51 Status Summary Page
Step 4. Select the Web interface functions by clicking the Function tabs at the top of the page. Each function
lists options in the
Navigation Bar on the left side of the page.
Step 5. Click an option link to display data in the
Display screen.
Step 6. Click
Refresh to update the display.
The iLO MP Web interface has a robust help system. To launch iLO MP help, click the
Help tab in the Display
screen or click the question mark key (?) at the top right corner of each page to display help about that page.
Accessing the Graphic Console Using VGA
VGA is a method you can use to access the graphic console.
NOTE You cannot access the iLO MP using VGA.
This method requires three elements:
• Monitor (VGA connector)
• Keyboard (USB connector)
• Mouse (USB connector)
The graphic console output displays on the monitor screen.
Function Tabs
Navigation Bar
Display Screen