Chapter 5
Troubleshooting
Troubleshooting Using Online Support Tools
139
Log Name Entries % Full Latest Timestamped Entry
-------------------------------------------------------------------
E - System Event 39 3 % 01 Nov 2004 17:15:03
Event Log Navigation Help:
+ View next block (forward in time, e.g. from 3 to 4)
- View previous block (backward in time, e.g. from 3 to 2)
<CR> Continue to the next or previous block
D Dump the entire log for capture and analysis
F First entry
L Last entry
J Jump to entry number
H View mode configuration - hex
K View mode configuration - keyword
T View mode configuration - text
A Alert Level Filter options
U Alert Level Unfiltered
? Display this Help menu
Q Quit and return to the Event Log Viewer Menu
Ctrl-B Exit command and return to the MP Main Menu
Step 4. Enter t to select text mode.
Step 5. Enter d to dump the log to the screen. (If desired, save this file for reference.)
Step 6. To decode the blinking state of the system LED, review the entire SEL and look at events with alert
level 3 and above.
For example:
Log Entry 24: 14 Feb 2003 15:27:02
Alert Level 3: Warning
Keyword: Type-02 1b0800 1771520
Hot Swap Cage: SCSI cable removed
Logged by: BMC; Sensor: Cable / Interconnect - SCSI ChExt Cable
Data1: Device Removed/Device Absent
0x203E4D0AC6020220 FFFF0008F61B0300
Log Entry 73: 00:00:12
Alert Level 3: Warning
Keyword: Type-02 050301 328449
The server's built-in sensors have detected an open chassis door.
Logged by: BMC; Sensor: Physical Security - Chassis Open
Data1: State Asserted
0x200000000C020570 FFFF010302050300
To Next Page
Loading...
