HP 9000 rp3410 - Table 1-5 PCI I;O Paths

Chapter 1
Overview
Detailed Server Description
33
Table 1-5 describes the PCI I/O paths for the server.
Table 1-6 describes the PCI I/O hardware paths for the server
Console port Interface with external console (ECI) Rear panel
(accessible thru W
cable)
0/7/1/1
Remote port Interface with UPS (ECI) Rear panel
(accessible thru W
cable)
0/7/1/0
UPS port Interface with UPS Rear panel
(accessible thru W
cable)
N/A
ECI
(VGA port)
Not used (disabled) Rear panel (with
VGA label)
0/7/2/0
N/A Baseboard console port (CLI) Rear panel (with
Serial A label)
Factory use only
N/A Baseboard serial port Rear panel (with
Serial B label)
Factory use only
Table 1-5 PCI I/O Paths
Slot
Function
Associated
with Path
Location‘ ACPI Path
Slot 1 64-bit, 133 MHz PCI-X card Top connector/slot in
PCI card cage
0/4/1/0
Slot 2 64-bit, 133 MHz PCI-X card Second
connector/slot in
PCI card cage
0/3/1/0
Slot 3 64-bit, 133 MHz PCI-X card (active rp3440 only) Third connector/slot
in PCI card cage
0/2/1/0
Slot 4 64-bit, 133 MHz PCI-X card (active rp3440 only) Bottom connector of
PCI card cage
0/6/1/0
Table 1-6 PCI I/O Hardware Paths
PCI Card Functionality MAPPER Path HP-UX Path
USB Port 0/0/1/0 0/0/1/0
USB Port 0/0/1/0 0/0/1/0
Table 1-4 Extended Core I/O Paths (Continued)
Slot
Function
Associated
with Path
Location‘ ACPI Path