HP 9000 rp3440 - Rear Panel; Figure 2-5 Rear View

Chapter 2
Installing and Configuring
Rear Panel
22
Rear Panel
The HP 9000 rp3410 or HP 9000 rp3440 server rear panel includes communication ports, I/O ports, AC power
connector, locator LED, and button. Additional LEDs located on the rear panel of the HP 9000 rp3410 or
HP 9000 rp3440 server signal the operational status of:
• 10/100/1000 base-T ethernet LAN port
• iLO manageability card LAN port
Figure 2-5 Rear View
Table 2-4 Rear Panel Connectors and Switches
Connector/Switch Function
AC power Primary power connection for the server
LVD/SE SCSI 68-pin, low-voltage differential, single-ended U160 SCSI. This connector provides
external SCSI connection on SCSI Channel B
(1 GB) 10/100/1000
LAN
10/100/1000 base-T ethernet LAN connector
Serial A (console) &
Serial B (do not use)
9-pin male serial ports—factory use only
USB Four universal serial bus (USB 2.0) connectors
TOC Transfer of control button. Halts all system processing and I/O activity and
restarts the computer system
AC Power Receptacle
LVD/SE SCSI
iLO Manageability
Card LAN port
10/100/1000 LAN
port
VGA Port-disabled
DO NOT USE
USB Ports
System Lock
Console/Serial Port A (factory use onl
y
Locator Button and LED
TOC Button
Console Serial Port B
(factory use only)
Console/Remote/UPS
PCI Slot 1
PCI Slot 2
PCI Slot 3
PCI Slot 4