HP 9000 rp3440 - Figure 2-9 Removing and Replacing the Metal Cover

Chapter 2
Installing and Configuring
Removing and Replacing System Covers and Bezels
27
Step 2. Ensure the top cover lock keyswitch is in the unlocked position. Rotate the blue release lever
toward the back of the system and slide the cover toward the back of the system (Figure 2-9).
Figure 2-9 Removing and Replacing the Metal Cover
Step 3. Lift the cover off the system chassis.
Replacing the Metal Cover
CAUTION Secure any wires or cables in your system so they will not get cut or interfere with the
replacement of the cover.