Chapter 2
Installing and Configuring
Removing and Replacing Airflow Guides
46
Step 10. Lift the front portion of the processor airflow guide out of the system (Figure 2-31).
Figure 2-31 Remove the Front Portion of the Processor Airflow Guide
Replacing the Processor Airflow Guide
Step 1. Replace the front portion of the airflow guide:
a. Align the release latch of the front half of the airflow guide over the release latch post and snap
it in place.
b. Connect the power connector on the front portion of the guide to the connector on the system
board.
Step 2. Insert system fans 1A and 1B into their mounting positions.
To Next Page
Loading...
